Specification
| Seamless Fittings – 1/2” to 24” Welded Fittings – 1/2” to 60” |
| ASTM B366 WPNCMC-S UNS N06625 Gr.1 (Nickel alloy for Weld Fittings) |
| A815 Gr. UNS S31803 CL WP |
| ASTM A185 Gr.WPS32750,UNS S32750 |
| ASTM A403 Gr WPS31254 |
| ASTM A182 F22 mod/A336 F22 mod |
| API 6A 10,000 psi -B564 UNS N06625 |
| B444 Gr.1 UNS N06625 Alloy 625 |
| A453 Gr.660 Gr D material in compliance with ISO 15156 / NACE MR 0175 |
| ASTM A860 WHPY 60 |
| API 6A 10,000 psi -A694 F60 |
| A453 Gr.660 Gr D material in compliance with NACE MR 0175 ISO 15156 |
| ASTM A312 UNS S31254 |
| A320 Gr. L7M |
| ALLOY 625 UNS N06625 |
| A 350 LF2 / 150# - RF125 AARH |
| MSS SP 75 |
| A333 Gr.6, SMLS |
| A 350 LF2 / 300# - RF125 AARH |
| API6A 15000 - BX flange |
| API 6A Type BX PressEnerg R G soft iron |
| B564 UNS N06625 |
| Elbow LR & SR Bend, Crosses, Stub-End, Tee, Reducer, Flange, End Cap |
| Long Radius Bends R-2D, R-3D, R-5D, R-6D, R-8D upto 22D |
| API 5L X42, X46, X52, X56, X60, X65, X70 |
| Long Radius Bends 30 Deg., 45 Deg., 60 Deg., 90 Deg., 180 Deg., 360 Deg. upto 60" Diameter |
| SA234 WPB, WPC, WP1, WP5, WP7, WP9, WP11CL7, WP12CL1, WP22, WP91 |
| ASTM A860 WPHY-42, WPHY-46, WPHY-52, WPHY-56, WPHY-60, WPHY-65, WPHY-70 |
| MSS SP75 WPHY42, WPHY46, WPHY52, WPHY56, WPHY60, WPHY65, WPHY70 |
| ASTM A234 WPB, ASTM A234 WPC, ASTM A234 WPB Seamless, ASTM A234 WPC Seamless |
| ASTM A234 WP1, WP11 CL1, WP11 CL3, WP12 CL1, WP22 CL1, WP22 CL3 |
| ASTM A234 WP5 CL1, WP5 CL3, WP9 CL1, WP9 CL3, WP91 |
| ASTM A403 WP304, 304L, 304H, 310S, 316, 316L, 316H, 321, 321H, 347, 347H, 317, 317L |
| ASTM A420 WPL3, WPL6, WPL8, WPL9 |
| ASTM A182 F304, F304L, F304H, F310S, F316, F316L, F316H, F321, F321H, F347, F347H, F348 |
| ASTM A182 F1, F11, F12, F22, F5, F9, F91, F92 |
| ASTM A694 F42, ASTM A694 F46, ASTM A694 F52, ASTM A694 F56 |
| ASTM A694 F60, ASTM A694 F65, ASTM A694 F70, ASTM A694 F80 |
| Duplex 2205, Duplex SAF 2205, Duplex SAF2205, Duplex UNS S31803, Din 1.4462 EN 10088 F51 |
| Super Duplex 2507, Super Duplex SAF 2507, Super Duplex SAF-2507, Super Duplex UNS S32750 F53 |
| ELBOWS LR, SR, BENDS, CROSSES, STUB ENDS, EQUAL TEES, UN-EQUAL TEES, CONCENTRIC REDUCERS, ECCENTRIC REDUCERS, CAPS |
| ASTM B-366, ASME SB-366, Nickel 200 & 201 (WPN & WPNL), Inconel 600 (WPNCI), Incoloy 800 (WPNIC), Incoloy 825 (WPNICMC), Monel 400 (WPNC), Alloy 20 (WP 20 CB), Hastelloy, C-276, C-4, C-22 etc. |
| ASTM B-363 & ASME SB-363, WPT7, WPT12, WPT2 |
| Titanium commercially pure Grade 1 & 2, confirming to ASTM B-337 Gr.2 / ASTM B-265 Gr.2 / ASTM B-363 Gr.WPT2 |
| High Alloy Austenitic SM06-254-EN No.1.4529/As per UNS S31250, UNS S31254, UNS S31256 |
| Duplex SS (BE.03-ASTM A790, A815-S31803 / WP410,ASTM A744, A789, A790 with UNS S31200, S31260, S32304, S32550, S32750,S32760 |
| 90/10 CuNi UNS C 70600, 70/30 CuNi UNS C71500 conforming to NES 779 part III |
| Inconel 600/601/625-SB 366, ASTM B366WPNC, MONEL-400 |
| Nickel 200 UNS NO2200 & Nickel 201 UNS NO2201 |
| SA 403 WP304L, 316L,317L.,321, 904L / SA234 WP5, WP9, WP11, WP22,WPHY65, WPB,API 5L, Grade 42,46,52,60,65 etc |
| Aluminium Gr.1060 Temper 'O' Aluminium Purity 99.6%,B241 Gr.1060 DIM NS |
| ASTM A312, A358, A403 (Seamless & Welded ) |
| API & WPHY 65/ 60 / 52 / 46 / 42 |
| Monel 400, SM06-254, Nickel , Stainless Steel, 309 Mo-L |
| Monel 400, SM06-254, Nickel, Stainless Steel, 410S |
| ASTM A312, A403 & A182-SM06-254, 904L,317L,304L,316L,321H,347H |
| ASTM A335, A234, A182 - WP 1 / WP 5 / WP 9 / WP 11/ WP 12 / WP 22 / WP 91 |
| ASTM A106 / A234 / A105 - WPA, WPB, WPC |
| A403 WPW, A234 WPBW, Two Halves Welded |
| NATIONAL & INTERNATIONAL CODES & STANDARDS: ASTM, ASTM I, ASMEI ASME Sec IIA, ASME VIII, ASTM IX., ANSI B 16.9/16.28/B 16.11/B 16.5 - MSS-SP 75 - MSS-SP-43-IS, DIN, GOST, BS, |